CNC lathe processing is mainly aimed at the characteristics of the wood product processing industry, combined with operating habits, using full Chinese character operation, easy to learn and use, and can process various complex shapes such as cylinders, cones, arcs, and spheres. , It can be flexibly set at any time, and the processing style can be changed quickly. The processing batch of parts should be larger than that of ordinary lathes. When CNC lathes are used to process small and medium-sized parts on non-CNC grinders, due to various reasons, the pure cutting time only accounts for 10 of the actual working hours. %-30%, increase the speed, reduce the feed rate, increase the rake angle appropriately, it will be your ideal lathe processing plant

Lathe cnc machining uses the rough and finishing method of ordering. For parts that are prone to processing deformation, due to the deformation that may occur after roughing, it needs to be corrected. Therefore, in general, all the rough and finishing processes must be separated. For parts with a lot of processing content on CNC lathes, the processing part can be divided into several parts according to its structural characteristics, such as inner shape, shape, curved surface or flat surface, etc., according to the ordering method of processing parts. Hole; Machining simple geometric shapes first, and then complex geometric shapes; processing lower precision parts first, and then processing higher precision parts. The tool concentrated sequence method is to divide the processes according to the tools used, and process them with the same tool After finishing all the parts that can be completed on the part, use the second tool and handle to complete other parts that can be completed. This can reduce the number of tool changes, reduce the idle time, and reduce unnecessary positioning errors.